caemasigis1971.netlify.com

If you are into woodworking, you will appreciate the value of making accurate cuts. The saw is one of the best tools to help you in achieving precise cuts. However, this can only be achieved when you have the right table saw miter gauge. The miter gauge is essential, especially when you need to make cuts at an angle. There are quite a number of features that are incorporated on the miter gauge for the tool to make your work easier. There is a protractor that is already calibrated, which you will use to make markings on the areas that you need to cut.

1. Craftsman Table Saw Guide
2. Table Saw Slot Rails
3. Miter Slot Slides

The miter gauge is designed in such a manner that you can easily place it on the stock when making cuts. With several models on the market, you may be overwhelmed and not be able to pick the best miter gauge. Fortunately, you do not have to worry, in this guide, I have done miter gauge reviews and provided other details to help you find the right miter gauge.

Table of Contents

A miter gauge consists of a long thin metal guide that rides in the miter slot in the table of your saw. Attached to this guide is a half-moon shaped head that pivots on its connection point to the guide. A locking mechanism allows this pivoting section to be locked into any angle, from -45 degrees to +45 degrees). Rip a 3 ⁄ 8 '-thick piece of hardwood, preferably hard maple, about 1 ⁄ 64' narrower than your saw’s miter slot. (Most are 3 ⁄ 4 ' wide.) Using a scrollsaw or bandsaw, cut three J-shaped kerfs as shown in the drawing, above, then drill a 1 ⁄ 8 ' hole in each 'tab,' making sure you don’t drill beyond the kerf. Turn on your saw and slide the table saw runner in for the cut, but only about 1 inch, then back it out. See if that end can fit in your miter slot. Shave just a bit off, about an inch into the runner. Check if that end fits into your miter slot.

• 1 Best Table Saw Miter Gauge Reviews In 2020
  • 1.1 1. Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence
  • 1.2 2. Kreg KMS7102 Table Saw Precision Miter Gauge System
  • 1.3 3. 27 Angle Woodworking DIY Tools Miter Gauge for Table Saw/Router Sawing Accessories Ruler
  • 1.4 4. Incra MITERV27 Miter V27 Miter Gauge
  • 1.5 5. DELTA Deluxe Miter Gauge
  • 1.7 How to Use Table Saw Miter Gauge Properly?

Best Table Saw Miter Gauge Reviews In 2020

Besides working on the table saw, a miter gauge can be used with a couple of different saws, include router tables and vertical saws. As such when you find the best miter gauge for your saw, you can use it with different cutting tools. Here is a review of some of the best options for miter gauges:

Picture	Product Name	Brand	Price	Order Now
Incra MITER5000 Miter 5000 Table Saw Miter Gauge	Incra MITER5000	$$$
Kreg KMS7102 Table Saw Precision Miter Gauge System	Kreg KMS7102	$$$
27 Angle Woodworking DIY Tools Miter Gauge for Table Saw	-	$$
Incra MITERV27 Miter V27 Miter Gauge	Incra MITERV27	$$
DELTA Deluxe Miter Gauge	DELTA	$$

1. Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

The Incra miter gauge is one of the top-rated miter gauges. It is well equipped with control features that will help you to make precise angular cuts. The main advantage of this type of miter gauge is the fact that it is compatible with various models. It comes with unique clamping abilities that will give you a secure work surface as it attaches to the saw. The special sled has 2 T tracks and 3 panels, which are made of aluminum, making it durable. With this miter gauge, you can rest assured that you will high quality cuts.

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

• Capitalizing on a great idea, the folks at Incra
• The sled with T-track and clamping fixture secures the work piece as one solid unit for...
• The right-hand portion of the sled, once cut
• Table saw that blends incremental angle control and a special 3-panel sled

Incra miter 5000 Features:

• The Incra miter gauge has a compact design and is pretty light to carry around
• This miter gauge has a sled and amazing clamping features that give you utmost precision.
• The miter gauge has the markings laser cut on the solid steel, making them permanently visible.
• The 364 lock solid angle stop is a feature that comes with ½ degree increments to ensure that your cuts are exact.
• The sled has 3 panels and the 2 T-tracks, which makes it easier for the Incra miter 5000 to blend easily with the angle control.

The error of margin on the Incra miter 5000 is next to nil as it has features that allow you to predict your cuts beforehand. The MDF panel top on the miter gauge is convenient as it allows you to move it easily over the stock. There is a telescoping fence with capacity that ranges from 36 to 64 inches. This is the IncraLock Cut-off fence that is designed to help you in your cutting. On the right side of the sled, there are slots that will help you to secure the miter gauge to the table saw.

There is zero clearance that allows you to align the miter gauge with the main sled conveniently. Clamping, stop positioner and angle adjustments are some of the abilities that cause this to rank as the best miter gauge. The 10 expansion disk can adjust on both sides, to give you total accuracy. The anti-friction travel feature is also another advantage as it will give you a smooth working experience when working with your saw. If you need to miter the sharp edges, you will use the interlocking grooves that are on the fence and the one stop features.

2. Kreg KMS7102 Table Saw Precision Miter Gauge System

The reason why the Kreg miter gauge finds its position here is the fact that it comes with a wide range of features. All the features are designed to help you save time and make angled cuts without compromising on the precision. You will not need to calibrate it as it is already set to make different angled cuts. There are positive stops that are spaced at 0, 10, 22.5, 20 and 45 degrees. This means that you will be able to use this miter gauge straight from the box to make your cuts.

Sale KREG KMS7102 Table Saw Precision Miter Gauge System, Blue

• Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
• Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
• Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch...
• Microadjuster allows additional angle adjustment to 1/100th degree

kreg precision miter gauge Features:

• There is a micro adjuster system on this Kreg miter gauge. This will provide you with the option to make very accurate cuts as it can be adjusted to 1/100^th
• The main benefit of this miter gauge is that you can even use it as a beginner as it does not need any calibration. It is preset at the factory and comes ready to use.
• There is a Swing Stop feature that has been included on this Kreg Precision miter gauge and positive stops which are spaced at 0, 10, 22.5, 30 and 45 degrees.
• There is a CNC machined gauge head on the miter gauge, which is a perfect square and as such, it fits perfectly on the table and the bar.
• The Vernier scale on the Kreg Precision miter gauge system can make adjustments to a 1/10^th degree, which guarantees you exact cuts.

Precision is one the things that the Kreg precision miter gauge has taken into account. There is a precision lens cursor that will enhance your visibility when you are making cuts. This lens is common in most top quality saws and is meant to make sure that the cuts are accurate to the point. There is a Vernier scale on this miter gauge, which is easy to use and does not require any calibration. You can make adjustments on the miter gauge to 1/10^th of a degree.

The Swing Stop gives you ultimate control when working with this miter gauge. In addition, there is a fence made of anodized aluminum, which is durable and stable. With these amazing features, making repeat cuts on your stock is much easier and this will save you so much time. Clearly, the Kreg Precision miter gauge system in one of a kind and would be worth considering. This is your best chance of making angled cuts that are of high quality and completely accurate.

3. 27 Angle Woodworking DIY Tools Miter Gauge for Table Saw/Router Sawing Accessories Ruler

The table saw miter gauge is quite light as it only weighs 3 pounds and as such, you will be able to accomplish your adjustments and markings easily. This is considered to be the best choice for those who are in professional sectors and need to make accurate cuts. You can use this miter gauge with any table saw as long as it measures 19 mm by 9.5 mm. The miter gauge will help you make angular cuts easily as it comes with an angle adjustment positioning block. The gap adjustment block, on the other hand, is meant to give you easy spacing when you need to make cuts.

27 Angle Woodworking DIY Tools Miter Gauge for Table Saw/Router Sawing Accessories Ruler

• The Miter Gauge is fit for standard miter bar dimension 3/8' by 3/4' (approximately 9.5mm...
• It can be used on most table saws and router tables with standard slots
• Oversized Clutch and can stay in the desired angle to meet your various needs! Is a good...
• Miter Gauge featuring 27 angle stops for precise incremental control.

27 angle miter gauge Features:

• The table saw miter gauge works with a number of the table saw and router tables as it can be used with the standard miter bar.
• With 27 angle stops, then you will have no reason not to get the accurate angles that you may want as the incremental controls are precise.
• There are a clutch and other essential features that make this to be the best miter gauge.
• This model comes with a tip resistant washer that enhances the rigidity of the miter gauge, when in use on extended surfaces.
• The 27 angle miter gauge has a large grip area that will give you enough space to handle it without compromising your safety and comfort.

The 27 angle miter gauge has been designed with 27 angle stops that will make it easier for you to make the relevant adjustments on your saw. The adjustable flip stop gives you absolute control and ensures that all the markings are on point. Overall, it is easy to make calibration and adjustment before making the required cuts. This is a durable model as it is made of high-quality material.

The compact design of this miter gauge table is also a great advantage as you can easily carry the saw without detaching the miter gauge. All standard bar miters are compatible with the miter gauge and the large grip is convenient as you can have a firm grip on the miter gauge and saw when making cuts. Once it is set, you will make repeated cuts without having to adjust it again.

4. Incra MITERV27 Miter V27 Miter Gauge

This is another amazing Incra miter gauge that is quite unique as it features 27 angle stops. This is responsible for the accurate incremental controls, which makes it rank among the top-rated miter gauges. While it carries an extensive range of features, this model is quite affordable. It will work with router tables, disk sanders, and band saws s among other cutting tools. The design is appealing and the fact that it is compact in size, it will make it convenient when you need to carry it around.

Incra MITERV27 Miter V27 Miter Gauge

• Miter Gauge featuring 27 angle stops for precise incremental control
• No-nonsense design and compact size
• Delivers extreme miter cutting accuracy
• Four expansion points adjust for zero side play

Incra miter gauge Features:

• The Incra miter gauge has a universal mounting bracket, which makes it compatible with any user-made fence.
• There is 27 angle stops on this miter gauge, which provides an incremental control that is precise.
• If you are looking for a miter gauge table saw with optimal accuracy then this would be it as it comes with dual pivoting flip arms and flip shop stop.
• There are 4 expansion points that will be adjusted for zero side play on the bar. This will ensure that the bar will not wiggle when connected to any tool.
• The design of the miter gauge is quite unique and has a compact size, which is convenient for most users.

This table saw miter gauge is known to deliver exceptional precision when you are cutting. This is facilitated by the AngelLOCK indexing system as well as the adjustable GlideLOCK miter bar. In total, you will be able to enjoy 41 locking angle stops that are in 5 degree increments. These are spread on the full 180 degrees range, giving you a wide scope of making the adjustment. You will get +/- 60 degree range miter cuts and there are special stops that are strategically placed at +/- 22.5 degrees.

The Flip Shop Stop is another feature on the best miter gauge as it gives you repeated accuracy instantly. This is great to increase productivity as there are hardly any downtimes. The dual pivoting flip arms are designed to ensure that your accuracy in on point. There are 4 expansion points that adjust for zero side play and anti-friction travel. This means that your bar will not wobble on the miter slot and as such, the cuts will always be accurate. There are universal mounting brackets that will make it easier to attach to any Incra fence.

5. DELTA Deluxe Miter Gauge

Deluxe miter gauge is another model that I have to review as it has made its name in the woodwork industry. This model is designed to give you maximum strength and comfort. Even If you are a novice, this would be a great choice as it is easy to use and will give you incredible accuracy. This is a miter gauge that will fit in any miter grooves that measure 3/8 by ¾ inches. It is a heavy duty miter gauge and will never disappoint you when you using it.

Sale DELTA Deluxe Miter Gauge

• This part is compatible with models including; 34-710,34-440 (90C12580 THRU...
• This is a manufacturer substitution. Part may differ in appearance but is a functional...
• Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Delta
• This miter gauge assembly (part number 34-929) is for table saws

Noticeable Features:

• If you are in search of a professional miter gauge, then this would be the right choice for you.
• As far as achieving accurate cuts goes, this miter gauge will help you to achieve just that as it comes with positive stops that are strategically placed an all the common angles.
• The delta miter gauge is designed to fit any miter groove slots that measure 3/8 by ¾ inches.
• There is a tip resistant washer, which will ensure that the miter gauge remains steady when you are working on the edges of extended surfaces.
• This is the high quality miter gauge for saw as it has very large grips that are meant to give you ultimate control and comfort.

There are oversized grips that are included on this model and as such, you are assured of maximum comfort and control. There is an adjustable guide bar on the miter gauge for table saw, which will make it easier to fit it into miter slots with tight tolerance. There are positive steps that have been placed on all the common angles, which makes it easier to use and adjust. The washer that has been included on this miter gauge is designed in such a manner that you do not have to worry about tipping when the miter gauge is being used on extended surface edges.

Any saw that has a T-slot miter grove can accommodate this miter gauge. It is quite compact in the size and has a unique design, which makes it fit on most miter grooves. All the incremental controls are on point and the fact that it has solid markings on the scale makes it much easier to pick and mark the angles that you intend to make cuts on. This is a heavy duty gauge and has been designed with the users in mind.

How to Determine What Miter Gauge Is Best For You?

Besides the table saw miter gauge reviews, there are some other factors that you should consider so as to determine the best gauge to use. Here are some of the key considerations that you need to bear in mind when looking for a quality miter gauge:

Work Piece Movement

You need to find a miter gauge that can reduce or completely remove any friction. As such, you need to get a miter gauge with a high quality sled, where the workpiece usually moves on.

Range and Capacity

Check the capacity and the maximum range of the miter gauge. This is to allow you to be able to use for different tasks. You need to consider the width as well as the extent of the scale on the miter gauge. This is what will determine if you can rely on the gauge for work pieces that have very wide and thick materials.

Compatibility

The other factor to consider is the saws that your miter gauge is compatible with. The best miter gauge is one that will fit on the standard miter bars. This makes it easier to also use such a gauge with a wide range of saws, besides the table.

User Friendly

There are some miter gauges that may take so much time to set and calibrate. You should go for one that is easy to use and adjust. Ultimately, the best option would be to pick the models that are already calibrated at the factory as you can use them straight from the box.

Price and Features

Consider the specific features that are on miter gauge. This is in comparison to the price that the miter gauge is being sold. You need to compare a number of models that are within a given price range and at the end of it all, you will settle for one that is loaded with the features you need and is affordable.

Design and Construction

Pick a miter gauge that has a compact size and design. You do not want to end up with a very bulky miter gauge that is difficult to use. You should also look at the construction material and establish that it is durable. You would not want to end up with a model that will start rusting or breaking in just a few days; find one that is strong and durable.

How to Use Table Saw Miter Gauge Properly?

With the best miter gauge, you will be sure that all the angle cuts you need to make are accurate. Some people do not realize that you can make a wide range of cuts when you learn how to use your miter gauge in the right manner. Here are some of the cuts that you can make with a miter gauge:

Square Cross Cuts

Square crosscuts are considered to be the most straight forward cuts that you can make with the best miter gauge. If you want to make these cuts, you should adjust the miter gauge to 90 degrees and confirm that it is precisely at 90 degrees. Slide the miter gauge all the way forward until the front area is visible. It is important to have the table saw unplugged from the power when making this marks.

Do not leave any gaps between the blade and the miter gauge. Lock down your workpiece using the lock and clamp system so as to ensure that it is held down firmly. When this is done, you should now slide the miter gauge back towards you. Place the stock against the flat edge of the miter gauge and place a mark with a pencil. At this point, connect your saw to power and align the blade to the markings and make your cut, while using the miter gauge as a guide.

Angled Cross-Cuts

Angled cross cuts are not so different from the square crosscuts, the only difference is the fact that the miter gauge is set at 45 degrees. Once you have set the miter gauge, you will follow the same steps above and end up making marks at the required points. Align the blade to the marking and then clamp down the work piece when making cuts.

Specialty Cuts

Last, but not least, to make the specialty cuts, you need to use a jigsaw and miter gauge. To achieve better stability, have a wood strip that will be placed facing the miter gauge. The specialty cuts are mainly used on long boards. For the best results, you need to support the board using the matching sets of holes on the miter gauge and wood screws. Attach the jigsaw to the miter gauge and follow the specific instructions that you have been provided with by your manufacturer.

Frequently Asked Questions:

Q: Can you recalibrate miter gauges?

A: In most cases, you can easily recalibrate the miter gauge to the desired point. This is the only way that you can be able to mark and make the cuts that are required.

Q: How can I adjust the angle between the table saw and miter gauge?

A: If you want to adjust the angle between the miter gauge and the table saw, you need to be sure of the angle that you want to achieve. Then you will adjust the gauge on the miter bar to incline to the desired angle.

Q: Can I use a miter gauge with a Rip Fence?

A: Yes, you can, depending on the specific type of cuts that you want to achieve. However, you need to be careful as in most cases, these accessories should not be used together, but it is better for long rip cuts.

Q: What safety precaution is ideal when working with miter gauges?

A: The most important thing is to ensure that you are not making any adjustments when your saw is connected to power as this could result in serious injuries. Only connect the saw when you are ready to make your cuts.

Final Recommendation

By now, you must have learned the great value of the miter gauge. Any time you need to have accurate cuts on angles, you will need to invest in a good table saw miter gauge. I have provided in-depthmiter gauge reviews in this guide to help you in picking the ideal model for your needs. All the models that I have reviewed are quite unique, but the Kreg KMS7102 Table Saw Precision Miter Gauge System stands out due to the versatile features and exceptional precision that it has to offer. It also works with a wide range of saws, making it a convenient accessory to have. I really hope that this guide has been of great use and will help you in your decision on the best miter gauge. Please feel free to drop a comment and also share this guide with your loved ones.

This article is from Issue 19 of Woodcraft Magazine.

The right accessories can take your number one tool, and your woodworking, to the next level. Learn which ones make the cut, and how they can work for you.

Whether it’s fresh out of its box, or has a few miles under its drive belt, your table saw might seem to make most cuts, well, good enough. But what you may not yet realize is that it can do soooo much more. Many woodworkers don’t know that table saws, like other shop tools, are supposed to be tinkered with and improved.

Of course, your choices of accessories and upgrades hinge on the work you want to do, and the accuracy you want to achieve. Knowing the best of what’s available can help.

Following is our list of the 15 top accessories and upgrades to turn almost any table saw from naughty to nice...really nice. We’ll also show items you might not have seen (and a few you’ve forgotten about), explain how they work, and discuss why you need them in your shop.

Safety First

Woodworkers love swapping scar stories. The best end with a near miss, the worst, with 9-1-1. Sadly, most admit that their mishaps could have been avoided with a little common sense and/or a few extra pieces of safety gear. For a few bucks, you can help a friend, or yourself, maintain membership in the “10-Finger Club” and ensure that more time’s spent in the shop, instead of the emergency room.

Craftsman Table Saw Guide

1 Five Piece Safety Set

Why you need it: This affordable “starter set” makes a smart buy for new table saw owners and experienced craftsmen alike. If you don’t know the exact location of each of these items in your shop, it’s time to buy some back-ups. A fully-equipped shop can benefit from a few well-placed extras. Keeping the right gear next to each machine saves time and eliminates the temptation of you putting your fingers too close to a blade in order to save a few seconds. Even if you choose to use pricier equipment, you might want to switch to a less-expensive spare when making a potentially-sacrificial cut…there are times when a little blade- or bit-contact is unavoidable.

2 Grip-Tite Featherboard

Why you need it: Featherboards serve as an extra set of hands where fingers should never go. Mesa Vista Design’s Grip-Tites do just that. Using a super-strong magnet, this jig stays in place better than simpler, clamp-in-place solutions, but the cam release makes them easy to remove and reposition. (You’ll probably find yourself “repositioning” this jig onto the other cast-iron or steel tables in your shop, such as your bandsaw or jointer.)

Note: Magnets don’t stick to aluminum or wood. Grip-Tite offers 36” and 42” long steel fence plates that can be screwed onto your existing fence. Additionally, they sell table saw fence clamps you can use to make an easy-to-remove metal fence, or a sacrificial plywood subfence for cutting rabbets with your dado blade.

3 Safety Power Switch

Why you need it: When a board starts to stick between the blade and fence, you need a way to quickly turn off the saw without shifting your attention from the cut, or letting go of your stock. A safety, or “kill,” switch makes it easy to turn off your saw with just a bump. Even when kickback isn’t a problem, you’ll find that the ability to keep your hands on your stock as the blade comes to a stop can lead to better-looking cuts. Not needing to worry about the threat of a slowing blade glancing against—or grabbing—the board eliminates the need to push long boards completely off the table and onto your floor.

HOOD AND UNDER-THE-HOOD UPGRADES

It’s nice to dream about building your dream shop around a cabinet saw, but in reality, many small-shop woodworkers are better off with a contractor saw. That’s because in terms of mobility, reliability, and affordability it’s tough to beat. These upgrades might not look like much, but they can minimize some small-saw shortcomings and help you take full advantage of all your saw can offer.

4 TopSaver Kit

Show me a woodworker who has everything, and I’ll show you a guy who’s got rust. He’ll appreciate this slick stocking stuffer. The $20 TopSaver kit contains an 8oz. pump bottle, two non-woven abrasive pads, two disposable cloths, and a pair of disposable gloves...everything needed for an hour or two of rust-management. The neat thing about this product is that once it’s sprayed on and buffed off, you won’t need to repeat the process for a long while.

More than just a de-ruster, TopSaver cleans and seals the surface. Somehow, this waterless formula sinks into the open pores of the metal, creating a protective barrier that repels moisture and reduces friction. The surface feels freshly waxed; however, the treatment lasts a lot longer. For obvious reasons, the secret ingredients aren’t listed on the label, but the manufacturer states that the product doesn’t contain oils, silicones, or other chemicals that might stain the wood or interfere with glues or finishes.

5 Power Twist Link Belt

Why you need it: In time, old-style V-belts stiffen and develop “bumps.” When this happens, your saw may seem underpowered, or produce ragged-looking cuts, even when carefully tuned. In the worst instances, your saw may start bouncing around. (As a test, detach the old drive belt and start the tool. If the motor runs quietly by itself, the problem is probably with your belt.) Twist-together urethane elastomer/woven polyester links (aka Power Twists) do not have a “memory” like V-belts, so they won’t deform, even if you don’t use the machine for months. Additionally, since each link moves independently, the belt stays flexible and absorbs minor vibration, which can help your saw sound and perform more smoothly.

6 Mobile Base

Why you need it: If you’re working in a small shop, you’ll need to move your saw around. (When sawing sheet goods, you’ll need 8-’ of clearance on the infeed and outfeed ends. If you’re using a crosscut sled, you may also need that much space on both sides.) A mobile base will enable you to wheel your saw out when and where it’s needed, and roll it out of the way when it’s not. The base shown here is a smart choice because it includes locking wheels to ensure that your saw stays in place while you’re making your cuts, and the adjustable feet enable you to make the machine stable even if the floor isn’t perfectly flat..

7 Contractor's Saw Dust Collector

Why you need it: If you’re tired of dragging out a broom, or tracking sawdust in the house every time you make a few cuts, this one’s for you. Simply stick the Velcro strips onto the base of your saw, then attach the cloth pouch. If you roll your saw around a lot, use the pouch in basic “collection” mode for 80% efficiency. When you plan to make piles of sawdust, switch the bag to “funnel” mode and connect it to your shop vac. When used with a vacuum, the $40 shop solution offers over 90% efficiency; about the same as a full-blown two-stage dust collector costing hundreds of dollars more.

blades (AND OTHER AD-ONS) FOR BETTER CUTS

In the end, all that really matters happens right where the blade meets the board. The blade plays a major role, but realize that it’s just a part of the show. A few supporting actors can help your blade deliver even cleaner cuts. Pay close attention to model numbers; make sure that the accessories fit your saw and work with the other upgrades you choose.

8 Zero-clearance Insert

Why you need it: LEECRAFT inserts are precisely machined phenolic plugs designed to replace the metal throat plates that come with most saws. Unlike the gaping-wide metal plates, these blanks are slotted by your sawblade to make a “zero-clearance” fit. A tighter-fitting throat plate reduces tear-out, improves dust collection, and eliminates that gap where small chunks of wood sometimes fall and then come hurtling back at you. You can make your own insert, but if you haven’t, buy one that’s ready-made and see what you’re missing.

9 Aftermarket Splitter

Why you need it: A well-thought out element on high-end saws, a splitter works like a rudder, preventing boards from sliding sideways, or squeezing in on the back edge of the blade (either instance can lead to burnt edges, or dangerous kickback). Such is not the case with all machines. Unfortunately, most woodworkers remove their splitters because they’re hard to adjust and a pain to remove when making cuts that aren’t completely through. If this sounds like you, check out the MJ splitter. This small, polycarbonate “chip” is easy to attach to (and detach from) any zero-clearance insert. Used when your blade is set at 90°, it helps steer boards for smoother, safer cuts.

10 Top-notch Sawblade

Why you need it: Most woodworkers will agree that buying the best blade you can afford is a smart investment. While you can get very good performance from a less expensive blade, Forrest alternate top bevel (ATB) blades have set the benchmark for super-clean rips and chip-free crosscuts in all types of materials. The super-hard carbide will slice hundreds of board feet; when it starts to dull, Forrest can resharpen your blade to its original specs for like-new performance.

11 Easy-to-adjust Dado Blade

Why you need it: The ability to cut rabbets, dados, and grooves makes dado blades a cabinetmaker’s best friend. Along with a good combination blade, a good dado set is the second smartest investment you can make. Freud’s dial-a-dado costs more than Freud’s standard 8” stacked dado set, but after spending an afternoon or cutting test grooves and shuffling shims, you’ll appreciate the convenience. The fine-tuning wheel offers .004” click increments to quickly and easily tweak the fit of a groove.

UPGRADES FOR AMAZING ACCURACY

There’s more in store for your saw than just 45° and 90°. These two jigs will enable you to quickly, consistently, and accurately cut miters and bevels to a degree of precision you might not have thought possible with your garden-variety saw.

Table Saw Slot Rails

12 Incra MIter Gauge V27

Why you need it: It’s tough to cut miters accurately when the bar wiggles in its slot, or the degrees imprinted on the head are 2° thick. Stepping up to an aftermarket gauge, such as the Incra v27 can help. The miter bar employs four expansion disks that eliminate any side-to-side play in your saw’s miter slot. Laser-cut V-stops ensure that you’re cutting the miter you’re after and can repeat the cut days later. Additionally, the universal mounting bracket on this gauge’s vertical fence allows you to add a store-bought or shop-made auxiliary fence for cutting boards to consistent lengths. Like other accessories, you can use this upgrade with any miter-slotted machine, such as your bandsaw, belt sander, or router table.

13 Wixey Digital Angle Gauge

Why you need it: Why you need it: Before this pint-sized gauge hit the market, cutting bevels was a set-test-set affair. Now, you can find any angle—to the nearest tenth of a degree—on the first crack. To use, simply “zero in” the gauge on your saw’s tabletop, then stick the magnetic base to the blade. Adjust the blade until the angle appears on the easy-to-read digital display.

14 Dial Indicator & Magnetic Base

Miter Slot Slides

Why you need it: The dial indicator wound up at the bottom of our list, but there are a lot of good reasons why it makes sense to be at the top of yours. This tool allows you to find and fix the micro-devils that gang up to spoil your work. Use the indicator on its magnetic base, or attach it to a simple guide bar to precisely set your saw’s tabletop, blade, and fence for line-splitting accuracy. Additionally, you can use your indicator to help set jointer blades, and inspect your other shop machines.